Code: M00001896RRP: $369.99

Earthquaker Devices Tone Job EQ/Boost

Pre-order available

$289.00 incl GST

The Earthquaker Devices Tone Job is a complete tone enhancement tool designed around a stereo preamp to cover as much frequency range as possible.

Pre-order available

Payment Options: Master card, Visa, American Express and PayPal logo

The Tone Job is a complete tone enhancement tool designed around a
stereo preamp to cover as much frequency range as possible. What does
this mean for you, the user? It means it can handle a wide variety of
frequencies from electrical guitars, bass guitar, synthesizer machines
and just about anything else you can plug in. The treble, bass and
middle controls will cut or boost up to 20db. In addition to that, the
level control will boost the signal (post EQ) up to 5 times the input
depending on where the dial is set.

Controls:
Level: Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 O’Clock.

Treble:
Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

Bass:
Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

Middle:
Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

Treble affects frequencies from around 2k Hz up, bass affects
frequencies from around 500 Hz down. The middle is an adjustable
resonant filter acting as a midrange control with it’s centre frequency
around 1k Hz. Treble and bass response are dependent on middle control
settings.

Analog, true bypass and hand made one at a time in good old Akron Ohio.

Measures
4 5/8″ x 2 1/2″ x 2.25″ with knobs

Power
A standard 9-18 volt DC power supply with a negative
centre 2.1mm barrel or 9v battery. We HIGHLY recommend investing in a
good isolated power supply made for musical instrument applications.

Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative centre barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MΩ
Output Impedance: <1 kΩ

 

This product is covered by a limited lifetime manufacturer warranty.

Although we are not authorised to determine if any repair is covered under warranty, if the item was purchased through World of Music, then we are often the best people to facilitate the claim for you and will do so as timely as possible. Warranty does not apply to cosmetic damage or faults that are a result of user neglect. Although your mate is really handy with a soldering iron, any product modification or home repair will also result in a void warranty.

Quite often, something perceived as a fault is as simple as a faulty cable or power issue so we always suggest checking over Frequently Asked Questions on the manufacturer website first. It can be a helpful approach to getting to the bottom of a problem and save you a lot of time in getting your gear back up and running!

This item ships via courier; fully insured for your peace of mind. Orders require a signature on delivery and we suggest using an address where someone will be present for the speediest delivery time. For delivery attempts with no one present to sign, your order will be taken to the courier depot and a card will be left for you to organise redelivery.

 

Product Description
The Tone Job is a complete tone enhancement tool designed around a stereo preamp to cover as much frequency range as possible. What does this mean for you, the user? It means it can handle a wide variety of frequencies from electrical guitars, bass guitar, synthesizer machines and just about anything else you can plug in. The treble, bass and middle controls will cut or boost up to 20db. In addition to that, the level control will boost the signal (post EQ) up to 5 times the input depending on where the dial is set. Controls: Level: Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 O’Clock. Treble: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon. Bass: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon. Middle: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon. Treble affects frequencies from around 2k Hz up, bass affects frequencies from around 500 Hz down. The middle is an adjustable resonant filter acting as a midrange control with it’s centre frequency around 1k Hz. Treble and bass response are dependent on middle control settings. Analog, true bypass and hand made one at a time in good old Akron Ohio. Measures 4 5/8" x 2 1/2" x 2.25" with knobs Power A standard 9-18 volt DC power supply with a negative centre 2.1mm barrel or 9v battery. We HIGHLY recommend investing in a good isolated power supply made for musical instrument applications.
Specifications

Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative centre barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MΩ
Output Impedance: <1 kΩ

 

Warranty

This product is covered by a limited lifetime manufacturer warranty.

Although we are not authorised to determine if any repair is covered under warranty, if the item was purchased through World of Music, then we are often the best people to facilitate the claim for you and will do so as timely as possible. Warranty does not apply to cosmetic damage or faults that are a result of user neglect. Although your mate is really handy with a soldering iron, any product modification or home repair will also result in a void warranty.

Quite often, something perceived as a fault is as simple as a faulty cable or power issue so we always suggest checking over Frequently Asked Questions on the manufacturer website first. It can be a helpful approach to getting to the bottom of a problem and save you a lot of time in getting your gear back up and running!

Shipping

This item ships via courier; fully insured for your peace of mind. Orders require a signature on delivery and we suggest using an address where someone will be present for the speediest delivery time. For delivery attempts with no one present to sign, your order will be taken to the courier depot and a card will be left for you to organise redelivery.

 

EarthQuaker Devices Tone Job EQ & Boost