Code: 0230103012RRP: $499.00

Fender Engine Room LVL12 Pedal Power Supply

Pre-order available

$419.00 incl GST

Pre-order available

Payment Options: Master card, Visa, American Express and PayPal logo

The Fender Engine Room LVL12 Pedal Power Supply is designed to accommodate all your pedalboard needs. Featuring twelve ground isolated power outlets, (10) are capable of delivering 9Vdc at 500mA while (2) additional outlets provide switchable voltage (9v/12v/18v) via 3-way toggle or slide switch. A courtesy IEC outlet on the back allows you to add an additional Engine Room LVL5, LVL8, or even LVL12 for the biggest rigs.

The Engine Room Power Supply was designed by Fender‘s in-house team of experts in Southern California. The chassis is crafted from lightweight, durable anodized aluminum, and its sleek, low-profile appearance is engineered to accommodate most pedalboards. Road-tested and ready for live or studio use, Fender’s Engine Room Power Supply is built to power your performance.

The Fender Engine Room LVL12 Pedal Power Supply is ready to deliver.

The Fender Engine Room LVL12 Pedal Power Supply Features

  • 12 ground isolated outputs – 10 outlets fixed 9Vdc at 500mA and 2 outlets with switchable voltage (9v/12v/18v)
  • Global mains input voltage (100-240Vac) 50/60Hz for use anywhere in the world
  • Standard IEC mains voltage connector
  • Dimensions: Length 282 mm (11.102 in); Width 90 mm (3.543 in); Height 42 mm (1.654 in)
  • 5V USB-A and USBC output for charging smart devices

The Fender Engine Room LVL12 Pedal Power Supply Cable kit included

  • 6 x 2.1mm barrel connector 24” (60cm) length
  • 4 x 2.1mm barrel connector 18” (45cm) length
  • 2 x 2.1mm barrel connector 12” (30cm) length
  • 1 x 2.5mm to 2.1mm barrel
  • 1 x 2.5mm to 2.1mm barrel reverse polarity
  • 1 x 3.5mm TS to 2.1mm barrel
  • 1 x 9V Battery clip to 2.1mm barrel
  • 1x IEC daisy-chain cable (male to female)

Fender guitars and amps are covered by a 2 year manufacturer warranty. Amp tubes are covered for 90 days by manufacturer warranty.

Although we are not authorised to determine if any repair is covered under warranty, if the item was purchased through World of Music, then we are often the best people to facilitate the claim for you and will do so as timely as possible. Warranty does not apply to cosmetic damage or faults that are a result of user neglect. Although your mate is really handy with a soldering iron, any product modification or home repair will also result in a void warranty.

Quite often, something perceived as a fault is as simple as a faulty cable or power issue so we always suggest checking over Frequently Asked Questions on the manufacturer website first. It can be a helpful approach to getting to the bottom of a problem and save you a lot of time in getting your gear back up and running!

This item ships via courier; fully insured for your peace of mind. Orders require a signature on delivery and we suggest using an address where someone will be present for the speediest delivery time. For delivery attempts with no one present to sign, your order will be taken to the courier depot and a card will be left for you to organise redelivery.

 

Product Description

The Fender Engine Room LVL12 Pedal Power Supply is designed to accommodate all your pedalboard needs. Featuring twelve ground isolated power outlets, (10) are capable of delivering 9Vdc at 500mA while (2) additional outlets provide switchable voltage (9v/12v/18v) via 3-way toggle or slide switch. A courtesy IEC outlet on the back allows you to add an additional Engine Room LVL5, LVL8, or even LVL12 for the biggest rigs.

The Engine Room Power Supply was designed by Fender's in-house team of experts in Southern California. The chassis is crafted from lightweight, durable anodized aluminum, and its sleek, low-profile appearance is engineered to accommodate most pedalboards. Road-tested and ready for live or studio use, Fender’s Engine Room Power Supply is built to power your performance.

The Fender Engine Room LVL12 Pedal Power Supply is ready to deliver.

The Fender Engine Room LVL12 Pedal Power Supply Features

  • 12 ground isolated outputs – 10 outlets fixed 9Vdc at 500mA and 2 outlets with switchable voltage (9v/12v/18v)
  • Global mains input voltage (100-240Vac) 50/60Hz for use anywhere in the world
  • Standard IEC mains voltage connector
  • Dimensions: Length 282 mm (11.102 in); Width 90 mm (3.543 in); Height 42 mm (1.654 in)
  • 5V USB-A and USBC output for charging smart devices

The Fender Engine Room LVL12 Pedal Power Supply Cable kit included

  • 6 x 2.1mm barrel connector 24” (60cm) length
  • 4 x 2.1mm barrel connector 18” (45cm) length
  • 2 x 2.1mm barrel connector 12” (30cm) length
  • 1 x 2.5mm to 2.1mm barrel
  • 1 x 2.5mm to 2.1mm barrel reverse polarity
  • 1 x 3.5mm TS to 2.1mm barrel
  • 1 x 9V Battery clip to 2.1mm barrel
  • 1x IEC daisy-chain cable (male to female)
Specifications
Warranty

Fender guitars and amps are covered by a 2 year manufacturer warranty. Amp tubes are covered for 90 days by manufacturer warranty.

Although we are not authorised to determine if any repair is covered under warranty, if the item was purchased through World of Music, then we are often the best people to facilitate the claim for you and will do so as timely as possible. Warranty does not apply to cosmetic damage or faults that are a result of user neglect. Although your mate is really handy with a soldering iron, any product modification or home repair will also result in a void warranty.

Quite often, something perceived as a fault is as simple as a faulty cable or power issue so we always suggest checking over Frequently Asked Questions on the manufacturer website first. It can be a helpful approach to getting to the bottom of a problem and save you a lot of time in getting your gear back up and running!

Shipping

This item ships via courier; fully insured for your peace of mind. Orders require a signature on delivery and we suggest using an address where someone will be present for the speediest delivery time. For delivery attempts with no one present to sign, your order will be taken to the courier depot and a card will be left for you to organise redelivery.