SE Electronics SE4400A Dual Capsule Condenser Microphone

$399.00

The sE4400a is based on the same capsule
tuning of the UK’s best selling capicitor studio microphone, the
original sE2200a (now discontinued), but with a dual capsule to give
multi polar pattern function, the sE4400a mic is a rarity… a true
all-rounder.

Sold out instore - available to order

SKU: SEEL_4400A Categories: , ,

Description

The sE4400a is based on the same capsule
tuning of the UK’s best selling capicitor studio microphone, the
original sE2200a (now discontinued), but with a dual capsule to give
multi polar pattern function, the sE4400a mic is a rarity… a true
all-rounder.

sE4400a Overview

The sE 4400 has 4 polar patterns: Cardioid,
Hypercardioid, Figure of 8 and Omni. Two bass cuts: 60Hz and 120Hz. Two
pads at 10dB and 20dB. The chassis is small… very small, but still
manages to house a twin diaphragm 1″ capsule and all the top grade
electronics and switches. This flat, round edged chassis design allow
the mic to be used flat onto a drumhead or guitar cab, or pushed through
into the skin of a kick drum. It is also perfect for sung vocals and
voice over work, because although it’s the smallest mic of it’s type, it
still ‘looks’ big when used full face on. It is extremely thin at less
than 3/4″ and fits neatly in the palm of your hand.

The sE4400a has a unique, black, non-reflective, non-marking,
rubberised finish which is ideal for live stage, theatre, TV and
broadcast applications which require lighting.

Finally, the capsule has been specially tuned after almost 2 years of
pre-market tests with professional studios and broadcasters, to really
be something that very few mics can; the true all-rounder. Vital in
professional studio or broadcast applications where an engineer needs to
know he can reach for a mic that will handle any job, and equally for
the home studio user who is on a budget and needs one mic to suit every
occasion. The mic is multi-functional yet uncluttered, the sound is
smooth and flattering and yet, because the capsules are hand made (like
all sE mics) and then individually tuned, it benefits from lacking the
usual hyped top end of most modern mass produced mics from automated
machines.

It comes with a unique shock mount which allows you to fit the mounted
mic into tiny spaces, or invert the shock clamp to extend the mic fully
outside the shock mount for close mic-ing applications or vocals. The
shock mount also fits the sE X. It also comes with a full, steel re-enforced, black aluminium, signature sE flight case.

Available also as a stereo pair,
hand-matched at the factory, this mic set is a classic for stereo
mic’ing rooms, drums, choirs, and mis/side micing instruments.

  • Frequency Response: 20Hz-20KHz
  • Sensitivity: 14.1mv/pa-37db ± 1dB
  • Polar Pattern: Cardioid, Figure 8, Omni, supercardioid
  • Impedance: ≤ 50 Ohms
  • Equivalent Noise Level: 17dB(A weighted)
  • Max SPL for 0.5% THD@1000Hz: 130dB
  • Power Requirement: Phantom power 48V±4V
  • Connector: 3-pin

This product is covered by a 2 year manufacturer warranty.

Although we are not authorised to determine if any repair is covered under warranty, if the item was purchased through World of Music, then we are often the best people to facilitate the claim for you and will do so as timely as possible. Warranty does not apply to cosmetic damage or faults that are a result of user neglect. Although your mate is really handy with a soldering iron, any product modification or home repair will also result in a void warranty.

Quite often, something perceived as a fault is as simple as a faulty cable or power issue so we always suggest checking over Frequently Asked Questions on the manufacturer website first. It can be a helpful approach to getting to the bottom of a problem and save you a lot of time in getting your gear back up and running!

This item ships via Australia Post; fully insured for your piece of mind. Orders require a signature on delivery and we suggest using an address where someone will be present for the speediest delivery time. For delivery attempts where no one is present, your order will be taken to your allocated Australia Post location for pickup. A card will be left with instructions of where and when you can collect your order.